How to regulate the use of deep hole drilling and boring machine operation?

Deep hole drilling and boring machine has universal, special and converted from ordinary lathe, in order to facilitate the cooling and chip removal, deep hole drilling and boring machine layout are horizontal, deep hole drilling and boring machine of the main parameters is the maximum drilling depth. We will talk about how to regulate the use of deep hole drilling and boring machine today:

1. Adjustment of deep hole drilling and boring machine speed, stroke, clamping tools and workpieces, and rubbing the machine tool to stop the car.

2. Automatic tool walking needs to select the feed speed, adjust the travel limit block. Manual tool feed is generally carried out in accordance with the principle of gradual increase and decrease in pressure to avoid excessive force leading to accidents.

3. Using the rocker arm drill, the cross arm rotary range is not allowed to have obstacles. No floating objects are allowed on the cross arm and table.

4. After the deep hole drilling machine is started, it is not allowed to touch the moving workpiece, tool and transmission part. It is prohibited to pass or pick up tools and other items across the rotating part of the machine.

5. When long iron chips are wrapped around the drill bit, stop the machine to remove them, and it is forbidden to use mouth blowing, hand pulling, brush or iron hook to remove them.