How To Use a Hole Cutter Drill Bit

How To Use a Hole Cutter Drill Bit？ The following steps are usually required when using a Hole Cutter Drill Bit for workpiece machining:

1. Select the right hole cutting bit: Select the right hole cutting bit according to the workpiece material and the required aperture.

2. Fixed workpiece: clamp or fix the workpiece on the workbench to ensure that it is stable and does not move.

3. Cooling lubrication: The use of cutting fluid or cooling oil to provide lubrication and cooling effects and reduce friction.

4. Determine the hole position: Mark or use the guide hole to determine the hole position to ensure accuracy.

5. Start cutting: Install the Hole Cutter Drill Bit, adjust the speed and feed rate, and slowly press the bit.

6. Control the cutting depth: ensure the accurate cutting depth by marking or depth stopper.

7. Clean the orifice: Use air pressure or blow tool to clean the orifice and keep it clean and tidy.

8. Check the processing quality: check whether the diameter, roundness and surface quality of the hole meet the requirements.

Pay attention to safety when operating, and adjust the parameters as necessary to obtain the best results.